3-in-1 Auto Stroker Review: Thrusting, Rotation & Suction (Real Photos)
All photos in this article were taken by the Gawk3000 team using a retail sample. Specifications come from the manufacturer's user manual (Item No. MMA-055). For adults 18+ only.
Quick verdict: This 3-in-1 auto stroker combines thrusting, rotation and suction in one handheld device. You get two simple controls: one for suction and one for thrusting-and-rotation, each with 9 levels. It suits adults who want an automatic stroker with suction. It is not the right pick if you need a waterproof body, a mount for hands-free use, or a near-silent device.
View the 3-in-1 Automatic Male Masturbator with Thrust, Rotation & Suction
At a Glance: Specifications
| Functions | Thrusting and rotation (9 levels), suction (9 levels) |
| Controls | Power button, suction button, extension (thrust/rotation) button, LCD display |
| Dimensions | 105 × 315 × 85 mm (about 4.1 × 12.4 × 3.3 in) |
| Materials | ABS, silicone, TPE |
| Battery | Built-in polymer battery, 3.7 V, up to 1000 mAh |
| Charging | USB (cable included, power adapter not included) |
| Noise rating | 60 dB or less (manufacturer rating) |
| Water resistance | Splash-resistant for daily use. The main body is not waterproof. |
What's in the Box
Our sample box contained:
- The auto stroker (main unit with transparent tube and TPE sleeves installed)
- A USB charging cable
- A pair of wired earphones for the headphone port
- An English user manual
There is no wall adapter in the box. Any standard USB power adapter or a computer USB port works for charging.
The retail box is plain black with no product photos on the outside. Orders are also shipped in plain outer packaging. See our Discreet Delivery page for details.
How the Three Motions Work
The "3-in-1" name refers to three motions: thrusting, rotation and suction. They are controlled with two buttons:
- Suction button: switches between 9 suction levels.
- Extension button: switches between 9 levels of thrusting and rotation. Thrusting and rotation run together on this button.
The LCD shows two numbers. The left number is the current suction level. The right number is the current thrusting-and-rotation level. You can run suction alone, thrusting-and-rotation alone, or both at the same time.
The clear outer tube lets you see the sleeve inside. The device uses two TPE sleeve parts: one at the bottom opening and one inside the transparent tube.
Inside the opening, the TPE sleeve has rows of soft ribs and small raised dots.
How to Use the 3-in-1 Auto Stroker
- Fully charge the device before first use.
- Press and hold the power button for about 1.5 seconds. The display lights up and the device enters standby mode.
- Apply a water-based lubricant to the sleeve opening.
- Press the suction button to start suction. Press it again to move through the 9 levels. Hold it for 1.5 seconds to turn suction off.
- Press the extension button to start thrusting and rotation. Press again to change the level. Hold it for 1.5 seconds to turn it off.
- Start at a low level and increase slowly. Stop right away if you feel any discomfort.
- When finished, hold the power button for 1.5 seconds to turn the device off, then clean it.
This is a handheld device. Our sample box did not include a mount or stand.
How to Charge It
The charging port is on the back of the top section, next to the headphone port. Connect the included cable to any USB power adapter or USB port. The manual recommends charging before the motions become noticeably weaker. Do not use the device while it is charging.
How to Clean an Auto Stroker
The main body is not waterproof. Only the TPE sleeve parts go under water. Following the manufacturer's manual:
- Remove the lid from the bottom and take out TPE sleeve No. 1.
- Find the lock mark. Turn the buckle from "lock" to "open" and separate the main unit from the transparent tube.
- Take TPE sleeve No. 2 out of the transparent tube.
- Wash both TPE sleeves with mild soap or a neutral detergent, rinse, and let them dry completely.
- Put both sleeves back, lock the buckle and replace the bottom lid.
For the main body, wipe it with a soft cloth that has been dampened and wrung out.
Do not:
- Rinse the main body under running water
- Use hot water or boil any part
- Clean it with alcohol, benzene, banana oil or other solvents. They can deform or discolor the TPE.
To help the TPE sleeves last longer, the manual recommends dusting them with a little talcum powder once they are fully dry. Store the device in a dry, ventilated place, out of reach of children.
Who It's For, and Who It's Not For
A good fit if you want:
- Suction plus thrusting and rotation in one automatic stroker
- Simple controls with a display that shows your current levels
- A sleeve you can take out and wash
Not a good fit if you want:
- Separate controls for thrusting and rotation
- A fully waterproof device for shower use
- A mount for hands-free use
- A near-silent device (the manufacturer rating is 60 dB or less)
Still comparing options? Read our automatic male masturbator buying guide.
Frequently Asked Questions
Is this auto stroker waterproof?
No. It handles everyday splashes, but the main body is not waterproof. Only the removable TPE sleeves should be washed under water.
Can I control thrusting and rotation separately?
No. Thrusting and rotation run together on the extension button. Suction has its own button.
How loud is it?
The manufacturer rates it at 60 dB or less.
Does it come with a mount for hands-free use?
No mount was included in our sample box. It is designed as a handheld device.
Can I use it while it is charging?
No. Unplug the charging cable before use.
Is a charger included?
A USB cable is included. A wall adapter is not, but any standard USB adapter works.
What lubricant should I use?
Use a water-based lubricant.
Shop the 3-in-1 Automatic Male Masturbator with Thrust, Rotation & Suction