Gluck Gluck 9000 Usage & Care Guide
Getting Started with Your Gluck Gluck 9000
Your Gluck Gluck 9000 has two buttons: a power button for switching the device on and changing its five thrusting settings, and a vibration button for cycling through seven vibration settings. This guide walks you through charging, button controls and everyday care.
Before First Use
- Inspect the contact sleeve, housing and charging cable. Do not use damaged parts.
- Clean the contact surface and let it dry.
- Fully charge the device, then disconnect the charging cable.
- Use a personal lubricant suitable for silicone toys. Do not substitute massage oil or hand cream.
For adults only. Keep the device and accessories away from children and pets.
How to Charge Your Gluck Gluck 9000
- Switch off the device. Make sure the charging port and cable connector are clean and dry.
- Connect the supplied charging cable. Seat the connector gently and connect the USB end to a compatible USB power source.
- Check the indicator. A flashing light indicates that the device is charging.
- Wait for a steady light. When the light stays on, charging is complete.
- Unplug before use. Disconnect the charging cable before operating or cleaning the device.
Flashing light = charging. Steady light = fully charged.
How to Use the Two Buttons
The lower button with the power symbol controls power and thrusting. The upper button with the wave symbol controls vibration.
| What you want to do | What to press |
|---|---|
| Turn on the device | Press and hold the power button to enter standby. |
| Start thrusting | While in standby, briefly press the power button. |
| Change thrusting settings | Briefly press the power button again to cycle through the five settings. |
| Start or change vibration | Briefly press the vibration button to start vibration. Press again to cycle through the seven settings. |
| Stop vibration | Press and hold the vibration button. |
| Turn off the device | Press and hold the power button. |
Turning the device on puts it in standby. To start movement, briefly press the power button once more. To start vibration, briefly press the vibration button.
Begin with a comfortable low setting and adjust one control at a time. Stop immediately if you feel discomfort. Keep fingers, hair and loose clothing clear of moving mechanisms.
Product Specifications
| Feature | Specification |
|---|---|
| Materials | Silicone and ABS |
| Overall dimensions | 267 × 86 × 73 mm |
| Net weight | 470 g |
| Thrusting settings | 5 |
| Vibration settings | 7 |
| Approximate running time | 50 minutes |
Running time varies with the selected settings and battery condition.
Cleaning and Storage
- Switch off and unplug. Disconnect the charging cable before cleaning.
- Clean the contact surface. Use warm water and mild soap, taking care to keep water away from the motor housing and charging port.
- Remove residue. Gently wipe away soap and lubricant with a clean, damp cloth.
- Dry thoroughly. Pat the surface dry with a soft cloth and let it air-dry completely before charging or storing.
- Store in a clean, dry place. Keep away from direct sunlight and excessive heat.
Clean before and after each use. Do not immerse the device, force parts apart or open the motor housing. Avoid solvents and abrasive cleaners. Keep the device for personal use.
Quick Troubleshooting
| Issue | What to do |
|---|---|
| The device turns on but does not move | Briefly press the power button to start thrusting from standby. |
| Vibration is off | With the device switched on, briefly press the vibration button to start it. |
| The device will not turn on | Charge until the indicator stays on, disconnect the cable, then press and hold the power button. |
| No charging light appears | Check that the power source is on and the supplied cable is securely connected. Inspect the cable for damage. |
If the device becomes unusually hot, produces an unusual odor or makes grinding sounds, stop using and charging it. For a persistent problem, contact Gawk3000 support with your order number and a short description of the issue.
Frequently Asked Questions
How do I know when charging is complete?
The indicator flashes during charging and stays on when the device is fully charged. Disconnect the cable before use.
Why does the device switch on without moving?
Switching on puts it in standby. Briefly press the power button to start thrusting, or the vibration button to start vibration.
How do I stop vibration without using the power button?
Press and hold the vibration button to stop vibration. To turn off the device, press and hold the power button instead.